Polophone

Description

MAIN FEATURES:

-Only two wires for a simple, quick and easy installation.
-Expandable up to five components with a maximum of two Entry Panels.
-Each panel fitted with two Call Buttons.
-Single or dual call button Modes of Operation.
-Intercommunication between two groups of Handsets.
-Award-winning style Handset.
-Each handset incorporates:
– Gate release for each Entry Panel.
– Auxiliary control button.
– Intercommunication Call Button.
– Gate status LED.
-12V DC operation with optional battery backup.
-Built-in lightning protection.
-To maximize the security of the installation an optional POLOswitch1 may be fitted

POLOPHONE TECHNICAL DATA:

DESCRIPTION
Input Voltage 1 12V – 14V DC supplied at any one of the components 1
Current Draw Quiescent – 150mA ±60mA for a One-to-One kit maximum – 200mA
Speech Volume Adjustable at each Entry Panel and handset
Wiring Two common wires polarised for speech, call and lock release
Ring tone Electronic while the button is depressed with separate tones when calling from each Entry Panel in a system or between groups of handsets
Call Confirmation at Entry Panel [*]
Wiring Distance Refer to thickness chart in the Manual
Gate/Door Release Potential-free normally-open contact
Handset Auxiliary Contact Requires separate wiring via two-wire bus
Operating Temperature -20°C to +50°C
Humidity 0 – 90% (non-condensing)
Degree of Protection IP55
Surge Protection [*]
Packaging Dimensions
Handset Length: 70mm x Width: 47mm x Height: 211mm
Entry Panel Length: 70mm x Width: 40mm x Height: 150mm
[*] – If the 12V DC gate motor supply dips when the motor starts up and the intercom is being used at the same time, the speech quality might be affected.